Search results for 'deans t'

Specification: Channels: 6CH RF Range: 2.4Ghz ISM(2.4005-2.483.5GHz) RF Distance: Ground 400m, Aerial:800m RF Power: ＜100mW Modulation: GFSK Spread spectrum: FHSS Reaction speed: PWM ≤20ms FR Distance: Ground：≈400m, Aerial：≈800m Receive sensitivity : ＜-97dbm Transmitter voltage : DC4.5V-9V Receiver voltage: DC4V-6V Irregular flashing indicating weak signal Constant light means calibration is complete Blinking indicates that calibration is in progress Code Step: 1. Turn off the transmitter, 2. Insert the code line correctly into the receiver "bing" interface, 3. Insert the ESC signal line correctly into the "CH3" channel, and the receiver LED will flash, 4. Firstly adjust the transmitter throttle stick to the lowest position, turn on the transmitter power switch , and receiver LED will go out, 5. Unplug the code line. At this time, the receiver LED will be on constantly, indicating that the code is successful. Receiver LED Status: Blinking: Indicates that the power is on, no signal, no match. Steady on: The match is successful. RF: There are three situation for the remont control status indicator: Constant light means the signal is good Regular flashing indicating no signal Learn More

Specification: FlySky FS-iA6B 6 Channels Receiver Model type: Airplane / Glider / Helicopter Channels: 6 Channels Frequency range: 2.4--2.48GHZ Band width number: 140 Transmitting power: Not more than 20dBm RF receiver sensitivity: -105dbm 2.4G frequency mode Encoding: GFSK Antenna length: 26mm * 2 (dual antenna) Input power: 4.0-6.5V DC Dimension: 47 * 26.2 * 15mm Weight: 14.9g i-Bus interface: Yes Data acquisition interface: Yes Color : Black 1 x FlySky FS-iA6B 6 Channels Receiver 2.4 GHz 1 x Bind Plug Learn More

Specification: 6 Channels Model Type: Fixed-wing/Glider/Airplane RF Range: 2.40 - 2.48GHz Bandwidth: 500KHz Band: 142 RF power:less than 20dBm RF.receiver sensitivity:-105dBm 2.4ghz System: AFHDS 2A Code Type: GFSK ANT length: 26mm Weight:6.4g Power:4.0-6.5V Size: 40.4x21.1x7.35mm Color: Black Certificate: CE,FCC Pack Includes: 1 x FS-I6 Transmitter 1 x 6-Channels Receiver FS-iA6B 1 x Bind Plug Learn More

RADIOLINK T8FB Transmitter with Receiver T8FB, with the same FHSS algorithm of AT9S Pro and 67 channels pseudo-random frequency sequence hopping, the chip TI CC2500(same as the Open TX Frsky X9D) and the transmission rate (which three times faster than Open TX), achieving the better anti-interference ability to both the same frequency band and different frequency bands. The control distance of T8FB is 2KM(1.24Miles) in air. ---------- R8SM, Super Mini Receiver: Standard receiver R8SM, with the super-lightweight of 2g(0.07oz) and the small size of 18*13mm (0.70"*0.51"), make it is tiny enough even for a racing drone. R8SM, with SBUS/PPM signal output, compatible with all kinds of flight controllers. The control distance is up to 2000 meters (1.24Miles). ---------- Adapts to Multiple Models Adaptable models include Fixed Wing, Glider, Multicopter, Car, Boat, and Robot. Transmitter automatically switches layout depending on the selected mode. The receiver with 21cm (8.27”) antenna is also perfect for easy RC boat control. ---------- Parameters Setup Via Android APP Connect T8FB to an android phone with a USB cable and an OTG cable to setup parameters. Upgrade firmware via computer always keeps T8FB with the most advanced system and program. The USB data backup copy function helps to save and copy customized parameters easily. ---------- Low Consumption of Battery Switching Mode Power Supply(SMPS) keeps the operating current of T8FB less than 80mA. With a 3S 1800mAh LiPo battery in T8FB, the RC fun lasts more than 20 hours. ----------- Specification: T8FB size: 173*102*206mm (6.8”*4”*8.11”) R8EF size: 41.5*21.5*11.5mm (1.63” *0.85” *0.45”) Weight (with R8EF): 0.47kg（13.05oz) Output Frequency: 2.4GHz ISM band（2400MHz~2483.5MHz） Modulation Mode: GFSK Channel Bandwidth: 400KHz Channel Pacing: 1200KHz Spread Spectrum: FHSS, 67 channels pseudo-random frequency hopping Adjacent Channel Rejection: >36dBM Transmitter Power: <100mW (20dBM) Reception Sensitivity: -104dBM Transmission Rate： 38kbps PWM Output Range: 1.0ms~2.0ms Section precision: 4096, 0.5us per section Cycle: 15ms/per frame T8FB operating voltage: 15ms/per frame T8FB operating current: 4.8V~18V R8EF operating voltage: <80mA R8EF operating current: 4.6~10V Compatible receivers: <30mA Compatible receivers: R8EF (Std), R8FM, R8SM, R8F, R7FG, R6FG, R6F, R4FGM, R4F Learn More

Specification: Neck Strap for Transmitter - Orange Adjustable Polyester Fiber Transmitter Safety Length: 140 cm Width: 2.5 cm Can be used with Flysky, MC6/4, Fly JR, FUTABA and other remote controllers Learn More

Specification: -. 3 Channels; -. Model type:car/boat; -. RF range:2.40-2.48GHz; -. Bandwidth:500Hz; -. Band:160; -. RF power:less than 20DB; -. 2.4G system:AFHDS; -. Code type:GFSK; -. Senditivity:1024; -. Low voltage warning:yes; -. DSC port: yes(3.5mm:output:PPM); -. ST range:90; - TH range:45(F:30;B:15); -. Charger port:yes; -. Power:3.7V DC; -. Weight:270g; - ANT length:33mm; -. Size:156*224*94.5mm; - Color:orange&silver&black; - Certificate:CE,FCC; Learn More

Specification: - 2 Channel Remote Control Radio - Model type: Car/boat - Code type: Digital - Color: black - Channels: 2Channels; - Model type: Car/boat; - RF Power: less than 20dbm; - Modulation: GFSK; - Code type: Digital; - Sensitivity:1024; - Low voltage warning: yes(less than 9w); - DSC port: yes (3.5mm); - Charger port: yes; - Power:12V DC(1.5AA*8); - ANT lenth:26mm; - Weight:328g;p - Size:159*99*315mm; - Color:black; - Certificate:CE FCC; Learn More

Specification: - Color: Silver - Application: fixed wing, car, boat - Band: 2.400GHz-2.483GHz - Transmitting power: <100mW - Operating Current: <120mA: -: Coding method: PCM1024 -: Fine Tuning Mode: Electronic Fine Tuning Mode - Dynamic range of rocker 80%—120% -: Power Supply: 4.8V-6.0V (4 AA batteries) -: Mix Control Mode: Delta Wing Mixing Mode and V-tail Mixing Mode -: Reverse switch: 1 channel aileron, 2 channel elevator, 3 channel throttle, 4 channel direction - Support for fixed-wing retractable landing gear and banned wings - Low voltage prompt: battery voltage <8.4V, power indication 500MS display 1 -: Modulation mode: Use FHSS mode that conforms to European standards Receiver Performance: -: Band: 2.400GHz-2.483GHz: -: Fast recovery signal -: out of control protection function: -: Straight line distance above ground: more than 800 meters - : Decoding method: PPM/PCMS 1024 - : Power Supply: 4.8-6V - : Size: 45 x 25 x 10 (mm) - : Weight: 9.6g The following is a quick and easy procedure for remote control transmitters and receivers for the McKay MC6A 2.4GHz: 1. Turn off transmitter and receiver power. 2. Connect the black "pair" plug to the receiver's "ID" connector 3. Connect the ESC signal cable to the third channel of the receiver and then connect the ESC to the battery. 4. At this point, it should be noted that the receiver LED will have a blinking green light. 5. Turn the transmitter throttle stick to the lowest position and turn on the transmitter. 6. When the receiver's green LED goes out, the receiver is now ready to go. 7. Remove the mating plug from the receiver. 8. Aileron servos, elevator servos and rudder servos are connected to the receiver according to your model aircraft instruction manual. 9. Finally, make sure your transmitter can fully control the bound receiver and check that each channel is normal. 10. If the test fails, repeat the entire process. Learn More

Specification: Neck Strap for Transmitters Learn More